C31 Auger Bullet Trencher Drill Bit Teeth and C30 Holder
HomeHome > Products > Auger Drill Bit > C31 Auger Bullet Trencher Drill Bit Teeth and C30 Holder
C31 Auger Bullet Trencher Drill Bit Teeth and C30 Holder

C31 Auger Bullet Trencher Drill Bit Teeth and C30 Holder

c31 auger bullet trencher drill bit teeth and c30 holderCutter & Pick The pick is a part of shearer, roadheader and rota
Basic Info
Model NO. Customization
Transport Package Wooden Box
Specification c3050
Trademark YIKUANG
Origin China
HS Code 8207191000
Production Capacity 10000
Product Description
c31 auger bullet trencher drill bit teeth and c30 holderCutter & Pick

The pick is a part of shearer, roadheader and rotary excavator. It is one of the vulnerable parts in coal mining and roadway driving machinery, and is the main tool for coal falling and coal crushing. Among them, the shearer pick model is represented by "U", the roadheader pick model is represented by "S", and the rotary excavator pick model is represented by "C".
Commonly used materials Judging from the imported and domestic picks actually used by some domestic coal mines, the cutter body materials are mostly 42CrMo, 35CrMnSi and other steel grades, and some coal mines use the newly developed Si-Mn-Mo series quasi-bainitic steel. The coal industry pick standard for heat treatment process stipulates that the hardness of the pick body is 40-45HRC, and the impact toughness is not less than 49J/cm2. During the machining process, the material of the pick body should meet or exceed the required mechanical properties through heat treatment.
Mining picks are subjected to high periodic compressive stress, shear stress and impact load when cutting coal and rock. Although the hardness of coal is not high, it often encounters hard minerals such as coal gangue. Friction and impact will also cause the temperature of the pick to increase. For the pick to work under such complex industrial and mining conditions, it is required that the pick body should have both wear resistance and good impact resistance.
The pick is mainly composed of a pick handle, a pick head, and an alloy cutter head. The pick handle and the pick head are often called the pick body. There are many types of mining picks, and the general structure is that a carbide tip is inserted on the quenched and tempered low-alloy structural steel cutter body.

Processing technology: The tooth body of the coal pick is made of high-strength alloy steel after heat treatment to maintain strong toughness and wear resistance; all the circlips are made of high-strength spring steel, which has good wear resistance. The head of the coal pick adopts isothermal quenching process, and the hardness is not reduced. The cemented carbide adopts YG13C processed by domestic regular manufacturers, and the quality is stable. Welding wear-resistant layer can be added according to customer needs. The hardness reaches more than 65 degrees.
Product Usage
Application field: Mainly used for coal mining and roadway, tunnel, ground ditching and other projects. Mainly equipped with shearer, roadheader, milling machine and other equipment.

categoryModelHeight(mm)Diameter (mm)Alloy size(mm)Tooth sleeve diameter(mm)
Shearer PickU47Φ157Φ64Φ19Φ30
Φ157Φ64Φ14Φ30
U82Φ152Φ50Φ22Φ30
Φ152Φ50Φ19Φ30
U84Φ139Φ55Φ16Φ30
Φ142Φ50Φ16Φ30
Φ142Φ50Φ19Φ30
U85Φ161Φ50Φ16Φ30
Φ195Φ55Φ16Φ35
U94Φ183Φ55Φ22Φ35
Φ178Φ54Φ19Φ35
Φ182Φ55Φ19Φ35
U95Φ182.5Φ54Φ23Φ35
Φ180.5Φ54Φ23Φ35
Φ182.5Φ54Φ23Φ35
Φ128.5Φ54Φ23Φ35
U170Φ222Φ62Φ25Φ35
Φ222Φ82Φ25Φ35
Φ222Φ62Φ22Φ35
Φ222Φ62Φ23Φ35
CategoryModelHeight(mm)Diameter (mm)Alloy size(mm)Tooth sleeve diameter(mm)
Roadheader Pick
S100Φ141Φ53Φ22Φ33.7
Φ143Φ53Φ13Φ33.8
Φ143Φ44.5Φ12Φ33.5
S120Φ153Φ70Φ22Φ38
Φ139Φ55Φ22Φ30
Φ139Φ50Φ17Φ30
S135Φ155Φ64Φ25Φ38
Φ157Φ62Φ25Φ38
Φ155Φ65Φ23Φ38
Φ166.5Φ65Φ25Φ35
S150Φ166.5Φ65Φ23Φ38
Φ153Φ70Φ25Φ38
Φ153Φ70Φ22Φ38
S160Φ149Φ61Φ27Φ30
Φ150Φ65Φ22Φ30
Φ149Φ61Φ17Φ30
Φ149Φ61Φ22Φ30
S260Φ156Φ80Φ34Φ37.5
Φ164.5Φ65Φ27Φ38
Φ165Φ65Φ25Φ38
CategoryModelHeight(mm)Diameter (mm)Alloy size(mm)Tooth sleeve diameter(mm)
Rotary Excavator PickC31/25-12H118Φ33Φ12φ25
C34/25-19H118Φ47Φ19φ25
C35/25-16H142Φ47Φ16φ25
C36/25-18H141Φ47Φ18φ25
C50/30-19H130.5Φ50Φ19φ30
C55/30-19H130.5Φ55Φ19φ30
C50/30-20H130.5Φ50Φ20φ30
C60/30-20H130.5Φ60Φ20φ30
C50/30-22H130.5Φ50Φ22φ30
C60/30-22H130.5Φ60Φ22φ30
C50/30-25H130.5Φ55Φ25φ30
C55/30-25H L150Φ55Φ25φ30

C31 Auger Bullet Trencher Drill Bit Teeth and C30 Holder

C31 Auger Bullet Trencher Drill Bit Teeth and C30 Holder

C31 Auger Bullet Trencher Drill Bit Teeth and C30 Holder

C31 Auger Bullet Trencher Drill Bit Teeth and C30 Holder

C31 Auger Bullet Trencher Drill Bit Teeth and C30 Holder

FAQ:

Q: Are you a manufacturer or trading company?

A: We are a specialized manufacturer.

Q: What are your main products, and used for?

A: Our products include core barrel, casing, drill rod, drill rig and other drilling parts.They are used for mineral exploration, geological drilling,

Q: How about the delivery terms?

A: 1.Payment: T/T, L/C, Western Union, Paypal, 30% deposit in advance and rest before delivery

2. Min. order quantity: 1 piece.

3. Transportation: By sea, train.

Q: How about discount?

A: Price is based on products and order quantity.

Q: Do you accept sample order?

A: Yes sure, please contact us for details.

Q: How about your after-sales service?

A: As a manufacturer has 32 years of history we offer prompt technology support for all problems and questions. Besides, we accept goods return or replace for quality problem.

Q: Where is your factory located in?

A: Our factory is located in Linqing city, Shandong province, China.

Q: How does your company control the quality?

A: Quality first. In order to guarantee high quality for our products, our always make a serious inspection for all products and raw materials in strict procedure.

We have obtained certificate of ISO9001*Yikuang is professional production of drilling tools, if you want to know more about our products, please feel free to contact us.